Toshiba DP120F Service Manual page 522

2.5.3 Paper Feed Sensor
Before disassembling or reassembling, be sure to refer to "1. Before Disassembling or Reas-
sembling."
(1) Remove the main block. (Refer to "2.4.20 Main Block.")
(2) Remove the paper guide unit. (Refer to "2.4.21 Paper Guide Unit.")
(3) Disconnect the connector from CN2 on the HVPS.
(4) Release the hooks of the paper feed sensor, and remove the paper feed sensor.
Hook
(5) Reassemble the components in the reverse order of disassembly.
NOTE: After reassembling, perform the sensor test referring to the "Chapter 11:
1.5.4 SENSOR TEST" on page 11-20.
DP120F/DP125F Removal/Replacement
Paper feed sensor
CN2
HVPS
Fig. 8-2-129
8-102
08-02-129
March 2000 © TOSHIBA TEC