(8)
Remove the seven screws from the plate, and remove the plate.
(9)
Disconnect the connectors from the optional paper size sensors.
(10) Release the hooks of the paper size sensors, and remove the paper size sensors.
Optional paper
size sensor
White
(11) Reassemble the components in the reverse order of disassembly.
NOTE: After reassembling, perform the sensor test referring to the "Chapter 11:
1.5.4 SENSOR TEST" on page 11-20.
March 2000 © TOSHIBA TEC
Fig. 8-2-156
Optional paper size sensor
Fig. 8-2-157
8-125
Plate
Blue
Red
DP120F/DP125F Removal/Replacement
08-02-156
08-02-157