2.1.11 Scanner Cover
Before disassembling or reassembling, be sure to refer to "1. Before Disassembling or Reas-
sembling."
(1)
Open the scanner cover, and release the scanner cover stopper from the top cover.
Scanner cover
(2)
Remove the four screws from the scanner cover, and remove the scanner cover.
(3)
Disconnect the connector from CN1 on the sensor PBA.
Sensor PBA
DP120F/DP125F Removal/Replacement
CN1
Connector
Scanner cover stopper
Fig. 8-2-22
Scanner cover
Fig. 8-2-23
8-16
Top cover
March 2000 © TOSHIBA TEC
08-02-22
08-02-23