Toshiba DP120F Service Manual page 72

(3) Enter the telephone number of your facsimile unit, then press [ENTER] key.
TEL NUMBER = (MAX20)
Enter a maximum of 20 digits including blank spaces and the International Code.
When the Optional 2nd NCU PBA is installed, the screen in Step (3) is displayed for the
LINE-2 setting. In this case repeat (2) through (3) for the LINE-2 requirements.
(4) When the "OPERATION COMPLETED" message is displayed, press the [STOP] key to
return to the Standby Mode screen.
1.1.4 Dial Type
This setting is used to determine the dial type of the telephone line to which the facsimile unit is
connected.
Use the [ ↑ ] or [ ↓ ] keys to move the cursor to the desired option (DP or MF) in the DIAL
(1)
TYPE screen, then press the [ENTER] key.
DIAL TYPE
1.MF
2.DP
MF (Multi-frequency)
Connects the telephone line of the facsimile unit, and uses it as a MF Line.
DP (Dial pulse)
Connects the telephone line of the facsimile unit, and uses it as a DP Line.
Then the Line 2 screen appears. Use the [ ↑ ] or [ ↓ ] key to move the cursor to the desired
(2)
option (DP or MF) in the DIAL TYPE (LINE-2) screen, then press the [ENTER] key.
DIAL TYPE (LINE-2)
1.MF
2.DP
MF (Multi-frequency)
Connects the telephone line to Line 2 of the facsimile unit, and uses it as a MF Line.
DP (Dial pulse)
Connects the telephone line to Line 2 of the facsimile unit, and uses it as a DP Line.
<Remarks> DIAL TYPE LINE-2 can not be set unless the optional 2nd NCU PBA is
installed.
DP120F/DP125F Function Settings
[MENU], [3], [4]
4-6
01/12
March 2000 © TOSHIBA TEC