2.3.10 LVPS
Before disassembling or reassembling, be sure to refer to "1. Before Disassembling or Reas-
sembling."
(1)
Remove the rear side frame. (Refer to "2.4.3 Rear Side Frame.")
(2)
Remove the four screws from the LVPS.
(3)
Disconnect the connectors from CN1, CN2 and CN3 on the LVPS.
CN1
LVPS
(4)
Reassemble the components in the reverse order of disassembly.
DP120F/DP125F Removal/Replacement
CN2
Fig. 8-2-66
8-52
CN3
08-02-66
March 2000 © TOSHIBA TEC