1.3.6 Send After Scan
This feature enables you to determine whether dialing starts while the machine is scanning the
documents or after the machine has scanned all documents in the Memory Send mode.
If dialing after scanning is selected, you can select to delete or send the scanned pages should
the memory become full during scanning.
Use the [ ↑ ] or [ ↓ ] keys to select the desired option, then press the [ENTER] key.
(1)
SEND AFTER SCAN
1.DIAL DURING SCAN
2.DIAL AFTER SCAN
DIAL DURING SCAN
To disable Send After Scan function.
DIAL AFTER SCAN
To enable Send After Scan function.
When "DIAL AFTER SCAN" selected, the screen below is displayed.
Use the [ ↑ ] or [ ↓ ] keys to select the desired option, then press the [ENTER] key.
WHEN MEMORY FULL
1.DELETE SCAN PAGES
2.SEND SCAN PAGES
DELETE SCAN PAGES
When the memory full occurred, to delete the pages being scanned.
SEND SCAN PAGES
When the memory full occurred, to send the pages scanned to memory.
(2)
After the "OPERATION COMPLETED" message is displayed, press the [STOP] key to
return to the Standby Mode screen.
March 2000 © TOSHIBA TEC
[MENU], [4], [2], [06]
4-33
DP120F/DP125F Function Settings