Toshiba DP120F Service Manual page 624

(6) Take out the recording paper from the Bypass tray. When the absence of recording paper
is detected, the screen below appears. After checking that the screen is displayed, load
the paper.
Detects the absence of record-
ing paper in the Bypass tray
SWITCH TEST
LOAD PAPER IN THE
BYPASS TRAY
<Remarks>
(7) Set both Flip book panels on the left-hand side.
(8) The result of the switch test ("OK" or "NG") is displayed on the screen, and the unit
returns to the test item select screen of the INDIVIDUAL TEST.
SWITCH TEST
OK
<Remarks>
<Remarks>
DP120F/DP125F Troubleshooting
Load the paper
If both Flip book panels are set on the left-hand side of the Operation panel,
the screen below is displayed. In this case, reverse the left and right for
the operation in step (7).
SWITCH TEST
FLIP BOOK PANEL ON
THE RIGHT-HAND SIDE
If one Flip book panel is set on either side, move the Flip book panel on the
right-hand side to the left-hand side and then move them to the right-hand
side.
The result of the SWITCH TEST can be checked with the self test report.
For printing the self test report, refer to "1.3 TEST RESULT LIST" on page
11-14.
If the result of the SWITCH TEST is judged to be NG, solve the problem by
referring to "1.5.4 SENSOR TEST" on page 11-20.
SWITCH TEST
FLIP BOOK PANEL ON
→
THE LEFT-HAND SIDE
11-12 March 2000 © TOSHIBA TEC