Received Image And Recording Paper Size; Recording Paper Selection And Print Condition Determination Algorithm; Recording Paper Selection Algorithm; Print Condition Determination Algorithm - Toshiba GD-1370 Service Manual

Fax board

Hide thumbs Also See for GD-1370:

Table of Contents

RECEIVED IMAGE AND RECORDING PAPER SIZE

2.1

Recording Paper Selection and Print Condition Determination

Algorithm

A received image is evaluated in the following order and then printed.

If recording paper whose size is the same as the one for the received image is not available, this

algorithm determines on which size of recording paper the output should be made.

This algorithm determines how the received image is to be printed on the recording paper.

2.1.1

Recording paper selection algorithm

It is possible to distinguish the size of each received image (A3, B4, A4, B5, A5, FOLIO, LD, LG, LT, ST,

COMP). Basically, printing is performed on the recording paper whose size is the same as the one for

the received image. If such recording paper is not available, a larger one is selected. If neither of them

is available, recording paper is selected according to the setting in FS-13-517 (Regular reduction

printing).

2.1.2

Print condition determination algorithm

If the length of the received image is longer than the effective printing area of the recording paper,

printing is performed in the priority order of; discard > vertical reduction > regular size reduction > split.

(For details, see the Discard / Vertical reduction / Regular size reduction / Split printing flow chart.)

RECEIVED IMAGE AND RECORDING PAPER SIZE

2 - 1

GD-1370

Table of Contents