2.6.10 Optional Paper Feed Roller Assembly
Before disassembling or reassembling, be sure to refer to "1. Before Disassembling or Reas-
sembling."
(1)
Remove the optional recording paper tray block. (Refer to "2.6.1 Optional Recording Pa-
per Tray Block.")
(2)
Remove the optional recording paper tray. (Refer to "2.6.2 Optional Recording Paper Tray.")
(3)
Remove the optional paper tray motor. (Refer to "2.6.7 Optional Paper Tray Motor.")
(4)
Open the optional paper jam clear door.
(5)
Remove the E-ring from the rear of the optional paper feed roller assembly.
Optional paper feed
roller assembly
DP120F/DP125F Removal/Replacement
E-ring
Fig. 8-2-148
8-118
08-02-148
March 2000 © TOSHIBA TEC