1.2.3 Key Touch Volume Adjustment
Use this setting to adjust volume of the key touch tone.
Use the [ ← ] or [ → ] keys to move the cursor to the desired position and press the
(1)
[ENTER] key.
SET KEY TOUCH VOLUME
VOLUME =(0-7)
0 1 2 3 4 5 6 7
VOLUME
Set a value in the range from 0 (minimum) to 7 (maximum).
(2)
After the "OPERATION COMPLETED" message is displayed, press the [STOP] key to
return to the Standby Mode screen.
1.2.4 Monitor Volume Adjustment
Use this setting to adjust volume of the line monitor.
Use the [ ← ] or [ → ] keys to move the cursor to the desired position and press the
(1)
[ENTER] key.
SET MONITOR VOLUME
VOLUME =(0-7)
0 1 2 3 4 5 6 7
VOLUME
Set a value in the range from 0 (minimum) to 7 (maximum).
(2)
After the "OPERATION COMPLETED" message is displayed, press the [STOP] key to
return to the Standby Mode screen.
March 2000 © TOSHIBA TEC
[MENU], [4], [1], [01], [03]
[MENU], [4], [1], [01], [04]
4-9
DP120F/DP125F Function Settings