8. Country/Region Setting Operation
The destination is programmed of this setting.
Once the destination has been programmed, it remains unchanged even if the country/region
setting operation is changed.
To change the destination, therefore, the memory clear operation is required.
* This operation will clear all the setting information, except the below.
• Drum counter
• Fuser temperature rank
• Print edge margin
DP120F/DP125F Installation
3-36
01/12
COUNTRY/REGION CODE
1: US/CA/LA
49: DE
44: GB
39: IT
32: BE
31: NL
358: FI
34: ES
43: AT
41: CH
45: DK
47: NO
351: PT
46: SE
33: FR
61: AU/NZ
30: GR
65: SG
852: HK
886: TW
86: CN
March 2000 © TOSHIBA TEC