(6)
The screen below is displayed to select options for Multi-address Transmission Report.
Use the [ ↑ ] or [ ↓ ] keys to select the desired option, then press the [ENTER] key.
SET MULTI-ADD REPORT
1.ALWAYS
2.ON ERROR
3.OFF
ALWAYS
Prints after every transmission.
ON ERROR
Prints only when an error has occurred in transmission.
OFF
Disables "print."
The screen below is displayed to select a document-added option. Use the [ ↑ ] or [ ↓ ]
(7)
keys to select the desired option (ON or OFF), then press the [ENTER] key.
PRINT 1ST PG IMAGE?
1.ON
2.OFF
ON
Adds the document data in the Report.
OFF
Does not add the document data in the Report.
The screen below is displayed to select options for Multi-polling Report. Use the [ ↑ ] or
(8)
[ ↓ ] keys to select the desired option, then press the [ENTER] key.
SET MULTIPOLL REPORT
1.ALWAYS
2.ON ERROR
3.OFF
ALWAYS
Prints after every Multi-polling.
ON ERROR
Prints only when an error has occurred in the Multi-polling.
OFF
Disables "print."
March 2000 © TOSHIBA TEC
4-47
DP120F/DP125F Function Settings