Toshiba DP120F Service Manual page 71

1.1.3 Terminal ID
This setting is performed to enter your own telephone (fax) number, terminal ID name and add
the international code which will be printed as TTI at the top of the received document on the
remote party side.
<Remarks> Be sure to input the Terminal ID information for LINE-2 if the optional 2nd
NCU PBA is installed.
(1) Entry the terminal ID name using the keyboard and press the [ENTER] key.
SET TERMINAL ID
ID NAME =(MAX40)
Terminal ID
A maximum of 40 digits can be entered including blank spaces. Refer to the section of
Character Entries in the Operator's Manual.
Select the desired option using the [ ↑ ] or [ ↓ ] keys (to select ADD+ or NOT NEEDED),
(2)
then press the [ENTER] key.
INT. CODE ?
1.ADD +
2.NOT NEEDED
ADD +
Selected to attach an International Code (Country/Region Code). When selected, the
symbol "+" is attached before the telephone number of your facsimile unit. Select this
side if your facsimile unit is used for international fax communications.
NOT NEEDED
Selected to not attach an International Code. Select this if your facsimile unit is used
solely for fax communications inside your country/region.
When either is selected, the screen below is displayed.
SET TERMINAL ID
TEL NUMBER =(MAX20)
March 2000 © TOSHIBA TEC
[MENU], [3], [3]
After about 2 seconds
→
4-5
01/12
ENTER NAME
ID NAME =(MAX40)
DP120F/DP125F Function Settings