2.4.24 Paper Pickup Solenoid (Paper Tray)
Before disassembling or reassembling, be sure to refer to "1. Before Disassembling or Reas-
sembling."
(1)
Remove the main block. (Refer to "2.4.20 Main Block.")
(2)
Release the cable from the cord clamp.
(3)
Remove the one screw from the paper pickup solenoid, and remove the paper pickup
solenoid.
(4)
Reassemble the components in the reverse order of disassembly.
NOTES: • When installing the paper pickup solenoid, perform the paper pickup sole-
noid gap adjustment referring to the "3.1 Paper Pickup Solenoid Gap" on
page 8-130.
• After reassembling, perform the print test referring to the "Chapter 11: 1.5.2
PRINT TEST" on page 11-18.
March 2000 © TOSHIBA TEC
Fig. 8-2-123
8-97
Cord clamp
Paper pickup solenoid
DP120F/DP125F Removal/Replacement
08-02-123