2.4.11 Pinch Roller
Before disassembling or reassembling, be sure to refer to "1. Before Disassembling or Reas-
sembling."
(1)
Remove the rear cover. (Refer to "2.1.5 Rear Cover.")
(2)
Remove the front cover assembly. (Refer to "2.1.6 Front Cover.")
(3)
Remove the right side cover. (Refer to "2.1.7 Right Side Cover.")
(4)
Remove the inner cover. (Refer to "2.1.13 Inner Cover.")
(5)
Remove the paper pickup solenoid. (Refer to "2.4.7 Paper Pickup Solenoid (Bypass Tray).")
(6)
Remove the printer frame right assembly. (Refer to "2.4.8 Printer Frame Right Assembly.")
(7)
Remove the front paper guide. (Refer to "2.4.10 Front Paper Guide.")
(8)
Remove the pinch roller spring from the pinch roller arm left.
Pinch roller arm left
DP120F/DP125F Removal/Replacement
Fig. 8-2-90
8-72
Pinch roller spring
08-02-90
March 2000 © TOSHIBA TEC