2.4.12 Paper Feed Roller
Before disassembling or reassembling, be sure to refer to "1. Before Disassembling or Reas-
sembling."
(1)
Remove the rear cover. (Refer to "2.1.5 Rear Cover.")
(2)
Remove the front cover assembly. (Refer to "2.1.6 Front Cover.")
(3)
Remove the right side cover. (Refer to "2.1.7 Right Side Cover.")
(4)
Remove the inner cover. (Refer to "2.1.13 Inner Cover.")
(5)
Remove the paper pickup solenoid. (Refer to "2.4.7 Paper Pickup Solenoid (Bypass Tray).")
(6)
Remove the printer frame right assembly. (Refer to "2.4.8 Printer Frame Right Assembly.")
(7)
Remove the front paper guide. (Refer to "2.4.10 Front Paper Guide.")
(8)
Remove the pinch roller. (Refer to "2.4.11 Pinch Roller.")
(9)
Remove the one screw from the paper feed earth plate, and remove the paper feed earth
plate.
(10) Turn the bushing at the front of the paper feed roller to the left, and remove the bushing.
Bushing
Paper feed earth plate
DP120F/DP125F Removal/Replacement
Bushing
Fig. 8-2-93
8-74
08-02-93
March 2000 © TOSHIBA TEC