(5)
Move the bushing located in the rear of the optional paper pickup roller assembly to the
front, and remove the optional paper pickup roller assembly.
Collar
Bushing
(6)
Reassemble the components in the reverse order of disassembly.
NOTES: • Set the collar to the paper pickup roller assembly as shown in the figure.
• When installing the optional paper pickup roller assembly, perform the pa-
per pickup solenoid gap adjustment referring to the "3.1 Paper Pickup So-
lenoid Gap" on page 8-130.
March 2000 © TOSHIBA TEC
Optional paper pickup
roller assembly
Fig. 8-2-151
8-121
Bushing
DP120F/DP125F Removal/Replacement
08-02-151