(5)
Remove the two screws from the paper pickup solenoid, and remove the paper pickup
solenoid.
(6)
Reassemble the components in the reverse order of disassembly.
NOTE:
• When installing the paper pickup solenoid, perform the paper pickup sole-
noid gap adjustment referring to the "3.1 Paper Pickup Solenoid Gap" on
page 8-130.
• After reassembling, load a document and press the [COPY] key. Confirm
that feeding normally operate from the bypass tray.
March 2000 © TOSHIBA TEC
Paper pickup solenoid
Fig. 8-2-85
8-67
DP120F/DP125F Removal/Replacement
08-02-85