Toshiba DP120F Service Manual page 463

2.3.4 NCU PBA (Line 1 and Line 2)
Before disassembling or reassembling, be sure to refer to "1. Before Disassembling or Reas-
sembling."
The NCU PBA (Line 1) is equipped with DP120F and DP125F as standard.
The NCU PBA (Line 2) is an option for DP120F, and equipped with DP125F as standard.
(1) Remove the PBA unit. (Refer to "2.3.1 PBA Unit.")
(2) Remove the three screws from the NCU PBA (Line 1). Disconnect the connector on the
NCU PBA (Line 1) from CN3 on the main PBA to remove the NCU PBA (Line 1).
Main PBA
March 2000 © TOSHIBA TEC
NCU PBA (Line 1)
CN3
Fig. 8-2-57
8-43 DP120F/DP125F Removal/Replacement
08-02-57