Toshiba DP120F Service Manual page 77

OFF
To deactivate the Super Power Saver mode.
When Automatic is selected, the screen below is displayed. Enter the desired TIME
period (in minutes) and press the [ENTER] key.
START TIME
TIME
Set the time period from 1 (minute) to 60 (minutes) for standby operation prior to
entering the Super Power Saver mode.
When PRINTER P.S. is selected:
The screen below is displayed.
Use the [ ↑ ] or [ ↓ ] keys to select the desired option (ON or OFF), then press
1)
[ENTER] key.
PRINTER POWER SAVER
1.ON
2.OFF
ON
To select the Printer Power Saver mode.
OFF
To deactivate the Printer Power Saver mode.
When ON is selected, the screen below is displayed. Enter the desired TIME period
and press the [ENTER] key.
PRINTER POWER SAVER
TIME PERIOD =
00:00 - 00:00
Enter the time period. The time on the left is the Printer Power Saver start time (or
time that the printer unit will power down). The time on the right is the Printer Power
Saver end time.
The time period shown above is the factory default setting and signifies continuous
Printer Power Saver operation.
(2) After the "OPERATION COMPLETED" message is displayed, press the [STOP] key to
return to the Standby Mode Screen.
March 2000 © TOSHIBA TEC
(01-60)MIN
03
4-11 DP120F/DP125F Function Settings