ON ERROR
Prints only when an error has occurred in transmission.
OFF
Disables "print."
(12) The screen below is displayed to select a document-added option. Use the [ ↑ ] or [ ↓ ]
keys to select the desired option (ON or OFF), then press the [ENTER] key.
PRINT 1ST PG IMAGE?
1.ON
2.OFF
ON
Adds the document data in the Report.
OFF
Does not add the document data in the Report.
(13) The menu selection is displayed for the user to choose options for Relay Transmission
End Terminal Report. Use the [ ↑ ] or [ ↓ ] keys to select the desired option, then press the
[ENTER] key.
SET RELAY END REPORT
1.ALWAYS
2.ON ERROR
3.OFF
ALWAYS
Prints after every Relay Transmission.
ON ERROR
Prints only when an error has occurred in transmission.
OFF
Disables "print."
March 2000 © TOSHIBA TEC
4-49
DP120F/DP125F Function Settings