(3)
Remove the three screws from the NCU PBA (Line 2). Disconnect the connector on the
NCU PBA (Line 2) from CN4 on the main PBA to remove the NCU PBA (Line 2).
CN4
(4)
Reassemble the components in the reverse order of disassembly.
NOTE: Carefully handle the boards that are directly connected together to avoid
damaging the connectors and boards.
DP120F/DP125F Removal/Replacement
Main PBA
Fig. 8-2-58
NCU PBA (Line 2)
8-44
08-02-58
March 2000 © TOSHIBA TEC