Toshiba DP120F Service Manual page 602

(14) Wipe the CF roller with a soft dry cloth. If the surfaces require moisture to remove the dirt,
use a cloth slightly dampended with water to remove the dirt, followed by a dry cloth to
remove streaks.
(15) Separate the Drum unit from the Developer assembly. The following figure shows the
Drum unit and Developer assembly.
March 2000 © TOSHIBA TEC
Drum unit
Fig.10-2-13
Fig.10-2-14
10-11
CF roller
Developer assembly
DP120F/DP125F Preventive Maintenance
10-2-13
10-2-14