(5)
Disconnect the connector from CN4 on the Mother PBA.
(6)
Remove the one screw from the hide plate, and remove the hide plate.
Hide plate
Mother PBA
(7)
Disconnect the connector from CN9 on the mother PBA.
(8)
Release the cable from the two cord clamps.
(9)
Remove the two screws from the fan motor, and remove the fan motor.
Fan motor
(10) Reassemble the components in the reverse order of disassembly.
March 2000 © TOSHIBA TEC
Fig. 8-2-80
Fig. 8-2-81
8-63
Mother PBA
CN4
Cord clamp
Mother PBA
CN9
DP120F/DP125F Removal/Replacement
08-02-80
08-02-81