Set Mode Schedule - Panasonic S-ICX Technical Manual

Section 700 - Operation
5. Dial the extension number of the phone being programmed.
6. Press the HOLD key.
7. Enter the Message Key ID code.
Notes: The ID code may contain up to 16 digits and contain
0, 1-9, *, #, pause (REDIAL key).
To clear an entry or existing data, press the FL/R key.
8. Press the HOLD key to store the entry.
9. To set additional Message Key ID codes, press the volume
up or down key or press the HOLD key to move to the
desired extension.
10. Repeat steps 7-9 until all Message Key ID codes are set.
11. Press the MEMORY key to exit the entry mode.
12. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Hardware Requirements
• N/A
Considerations
• N/A

Set Mode Schedule

Description
(For a description of Automatic Day/Night System Mode, see "Automatic Day/Night Mode" on page
36.)
You can set the System to automatically enter None, Day 1, Day 2, Night, Night (1), or Night (2)
modes based upon mode patterns. You can define up to 3 patterns with up to 5 modes for each day.
(This menu allows the setting of the patterns.)
Operation
S-ICX-50-700
Action
S-ICX (International) issued October 2000
Chapter 4. User Maintenance
Result
MSG-ID EXT XXX displays (where
XXX = extension number)
Next extension number displays
Desired extension number displays
MSGID - EXT Number displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
87