Walking Extension; Timed Reminder - Panasonic KX-TAW848 Features Manual

User Manual References
User Manual
1.7.9 Extension Feature Clear

1.22.3 Walking Extension

Description
It is possible for an extension user to trade extension settings with another extension.
When Walking Extension is executed, all extension settings (extension number, Class of
Service (COS), One-touch Dialing memory, etc.) of the "old" extension are exchanged with the
"new" extension.
This feature is useful when an extension user moves desks, or when an extension user has no
permanent desk.
This feature is also known as Walking Station.
Conditions
• This feature is available by switching the telephone between proprietary telephone (PT)
and PT, single line telephone (SLT) and SLT, PT and SLT. Moving across the tenants is
also possible.
• Incoming calls to your extension will reach you at your new location.
• An extension personal identification number (PIN) is required to use this feature. (
1.22.1 Extension Personal Identification Number (PIN))
• If a DSS Console is connected to a PT and the DSS Console is continuously used with the
PT after the Walking Extension has been performed, the new extension number of the PT
must be assigned as the paired extension through system programming (
Paired Telephone [007]).
User Manual References
User Manual
1.10.1 Walking Extension

1.22.4 Timed Reminder

Description
Each extension user can set an alarm to be used as a wake-up call or reminder. This feature
can be programmed to activate daily or once only. If the user goes off-hook during the alarm,
a special dial tone will be heard. If a voice message is used, a prerecorded voice message will
be heard.
Conditions
• Be sure that the PBX clock is set to the correct time.
• Setting a new alarm time clears the previous alarm time.
1.22 Extension Controlling Features
Feature Guide
Console
161