Set Send Text Messages - Panasonic S-ics Technical Manual

Section 700 - Operation
Considerations
• N/A

Set Send Text Messages

Description
You can send a text message to a key telephone with a display when you are sending call waiting
signal (Auto camp-on or manual camp-on). This menu item specifies the text messages that may be
sent.
Operation
To set Send Text Messages using either a large-display or small-display phone:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 79.)
2. At the 81 level, enter 11.
3. Press the HOLD key.
4. Enter 0.
5. Press the HOLD key.
6. Press the HOLD key.
7. Enter the Message number (0-9).
8. Press the HOLD key.
9. Enter the Text Message (up to 15 characters):
• If using a large-display phone, press the soft key next
to the desired row of letters. (See Example 1 on page
95.)
• If using a small-display phone press the appropriate
one-touch key. (See Example 2 on page 96.)
Note: Press the FL/R key to clear any existing data.
10. Use the bottom row of FF keys to select a single letter.
• See Example 1. Large-Display Phone on page 95.
• See Example 2. Small-Display Phone on page 96.
Notes:
• Press the * key to erase a single entry.
• Press the # key to enter a space.
S-ICX-64-700
Action
S-ICX (International) issued April 2002
Chapter 4. User Maintenance
Result
81-
User MAINT displays
8111-
Text Message displays
8111-0:
Send Message displays
Enter Msg # displays
A B C D E F X
displays (where X = Send Text Message
number)
99