Button Labels; L32/L64/S100 Panels - GRASS VALLEY JUPITER L - V2.1.0 Instruction Manual

Button Labels

L32/L64/S100 Panels

VTR VTR VTR VTR
1 2 3 4
JUPITER L-S and LCD Series Control Panel Instruction Manual43
of performing 100 Mb operations, and each Ethernet segment (hub to
panel) has a 100 meter limit. See Figure 11.
Figure 11. LAN only system connections.
CM-4000
System
Controller
(AccuSwitch)
to Jupiter
IP switch
File Server
Most L-S series panels are supplied with "typical use" button labels already
installed. Additional buttons can be labeled in the field. Two resources are
available for labels:
• A pre-printed/pre-cut transparency keycap label sheet is supplied with
each panel. See Keycap Transparency Labels
• Microsoft Word files are available for creating custom labels. For more
information, contact Grass Valley Technical Support.
The L32 and L64 panels have 32 or 64 buttons respectively, on the left side
of the panel that can be used for Button-per-Source operation. The S100
panel has 100 buttons for this purpose. Using the label resources described
above, these buttons can be labeled 1 through 32, 64, or 100.
Figure 12. L32 with Custom Labels
VTR
VTR VTR VTR VTR
6
5 7 8 9
100baseT Jupiter LAN
Button Labels
64 LAN-operated
L-S panels per CM
maximum
LAN 1 (Cat 5 Ethernet) cable.
Max. recommended length per
segment = 100 meters (329 ft)
on page 46.
Destination
Preset
Status