Section 1 - L-S Series Introduction; Overview - GRASS VALLEY JUPITER L - V2.1.0 Instruction Manual

L-S series Introduction

Overview

JUPITER L-S and LCD Series Control Panel Instruction Manual31
The Jupiter L-S series Control panels are designed to control television
matrix routers through a Grass Valley Jupiter CM-4000 (or CM-4400)
Control System running the AccuSwitch application. Although the panels
are primarily intended to control Concerto, Trinix, Apex, and Venus
routers, any matrix router that can be controlled by an AccuSwitch can also
be controlled by these panels.
Note The CM-4000/4400 must be operating with Jupiter AccuSwitch version 7.6
or newer to support the L-S panels. The L-S panels are not intended for use
with CM-4000/Jupiter XPress applications nor with Jupiter VM-3000 System
Controllers.
The L-S series is comprised of the following units:
• L32, L64, LD4, and LD16
• S25, S50, S100, and SXY
L prefix panels have large (1/2- inch) multi-color buttons. S prefix panels
are equipped with smaller (3/8-inch) multi-color buttons.
L-S panels can be ordered with an AC or DC power supply. The AC power
supply mounts on the rear of the panel. No power switch is present. The
AC or DC line cord is disconnected to power down the panel.
1
Section