Table of Contents
Advertisement
Section 11 — LCD Series Panel Operation
Level Mode
170
7. Press the
button to make the selection active. The button will now
TAKE
return to the original color and the switch will then occur.
The Level mode is designed to provide access to each level that is assigned
to a Destination, which makes breakaway switches easier to complete. Each
panel displays the available levels for a selected Destination. An individual
level may be locked or protected. You must be in the Main menu to see the
button.
Level Mode
When the Level mode menu appears, how the buttons appear will depend
on the Sticky levels feature:
• If the Sticky levels feature is ON, all levels will be off (or unselected)
and will be colored amber.
• If the Sticky levels feature is OFF, all levels will be on (or selected) and
will be colored white.
The ability to quickly select individual levels is offered in this mode using
the
button. This feature is described below in the Setting all
Set All Levels
Levels On or OFF
on page 171
The following figures show the Levels mode for the LCD16 and the LCD48
panel.
Figure 89. LCD16 -Level Mode
Level Buttons
Figure 90. LCD48 - Level Mode
JUPITER L-S and LCD Series Control Panel Instruction Manual
section.
Command Buttons
Level Buttons
Command Buttons
Advertisement
Table of Contents
