Secondary Modes; Other Panel Functions; Additional Control Panel Features - GRASS VALLEY NV9000 User Manual

Operators perform a take by selecting a destination, (optionally) selecting levels, selecting a
source, and pressing the take button under any of the selected LCD buttons. The operator
uses the function buttons to select a source and to select a destination. See
Selection

Secondary Modes

Additional but secondary modes of panel operation are:
• Setup mode — where the panel is freshly powered up, but disconnected from the
network. In this mode, you can preset the panel ID and perform a few diagnostic tasks.
• Salvo mode — pressing a salvo button places the panel in salvo mode, where it is
expected that the operator will choose a salvo on the LCD button, possibly scrolling to
find the salvo. (The duration of a salvo is indeterminate, but usually short.)
• Menu mode — pressing a menu button places the panel in "menu" mode. In menu
mode, the buttons lose their normal functions and become part of a menu that
changes as needed during menu operation.
• Source mode — pressing a source mode button places the panel temporarily in source
mode, where the operator can use category and suffix buttons to select a source.
• Destination mode — pressing a destination mode button places the panel temporarily
in destination mode, where the operator can use category and suffix buttons to select a
destination.
• Hold mode — when hold mode is active in X-Y mode, a breakaway level selection
remains in effect until the operator turns hold mode off. In MD mode, when hold mode
is active, the operator may select multiple destinations.
• Save preset mode and load preset mode — pressing a 'Save Preset' button places the
panel in a temporary mode in which you can name and save a preset selection.
Pressing a 'Load Preset' button places the panel in a temporary mode in which you can
select a saved preset selection.
When the panel is not in setup mode, salvo mode, or menu mode, we say it is in normal
mode.

Other Panel Functions

The NV9616 and NV9608 can be configured to perform the following additional functions:
• Previous source and free source.
• System salvos and local salvos.
• Lock/protect/release for destinations.
• Multiple- and single-level breakaway.
• Broadcast data routing.
• "Gang" takes.
on page 33 for more information.
NV9608 and NV9616
User's Guide
Category
7