Getting Started
Start-Up Sequence
Start-Up Sequence
The panel runs through its start-up sequence when powered on. This lasts approximately 1
minute. During start-up the panel briefly displays:
1 an
2 a
Splash Screen
3 an operating
Initial Start-up Screen
The ATP-2000 initial GV Grass Valley start-up screen is shown in Chapter 2,
page 11.
Splash Screen
During start-up, the panel briefly displays an initial screen followed by a Splash screen,
which shows some unit information, including:
• ATP-2000 panel model number.
• ATP-2000 software version.
• Unit's IP address.
ATP-2000 product name
Fig. 3-1: ATP-2000 Splash Screen
Home Screen
After start-up, the ATP-2000 shows an operating Home screen. See Figure 3-2 for an
example home screen.
14
Initial Start-up
Screen; followed by
for about 1 minute; and finally
Home
Screen.
Software version
IP Address of panel
Subnet Mask
Note: The operating Home screen shown depends on the soft panel
currently loaded into the ATP-2000 Advanced Touch Panel.
Note: Click the Home icon on any screen to return to the Home screen.
Figure 2-6
on