Menu Selection Method; Selecting A Source; Direct Selection Method - GRASS VALLEY JUPITER L - V2.1.0 Instruction Manual

Section 6 — L-S Series Panel Operation

Menu Selection Method

Selecting a Source

Direct Selection Method

102
1. Clear the panel (
Level
2. Press the button. The window will display configuration modes.
Menu
3. If necessary, use the
mode.
Destination?
4. Press . Destination names will appear in the Status (L32) or Preset
Take
(L64) window.
5. Use the arrow buttons to scroll to the desired Destination.
Up/Down
6. Press . The Destination window will display the name of the
Take
Destination now being controlled.
You will now be able to select a different Source for that Destination.
The following information explains how to select a source.
Working with a Locked or Protected Destination
If a Destination has been Protected or Locked by another panel, the
button will illuminate steady amber (Protect) or red (Lock) and the
Lock
Destination will not be able to be switched. To continue:
• The Destination must be unprotected or unlocked by the panel that set
the protection or locked the destination (the name of that other panel
will be displayed in the menu).
• The panel can force the destination to be unprotected or unlocked if the
panel has a password set. See the 7.8.1 Jupiter Release notes (part #
071827511) for more information.
Buttons configured for Sources illuminate in green.
1. Clear the panel (
Level
2. Press the low green button for the desired Source. The Source will be
switched to that Destination, the button will illuminate in bright green,
and the name for the Source will be shown in green in the Status
window.
JUPITER L-S and LCD Series Control Panel Instruction Manual
, , and buttons OFF).
Menu Preset
arrow buttons to scroll to the
Up/Down
, , and buttons OFF)
Menu Preset
Select
Protect/