Shift Warning Light - Husqvarna SVARTPILEN 200 2022 Owner's Manual

7.5

Shift warning light

COMBINATION INSTRUMENT 7
Malfunction indicator light lights up yellow – The
OBD has detected a malfunction in the vehicle elec-
tronics. Come safely to a halt, and contact an autho-
rized Husqvarna Motorcycles workshop.
The shift warning lights up/flashes red – The shift
warning light flashes red when the set shift speed
RPM1 is reached. The shift warning light lights up
red when the set shift speed RPM2 is reached.
The idle indicator lamp lights up green – The trans-
mission is in neutral.
The high beam indicator lamp lights up blue. – The
high beam is switched on.
ABS warning lamp lights up yellow – Status or error
messages relating to ABS.
The shift warning light
play.
Info
The shift warning light can be configured in the Trip 1 dis-
play and Trip 2 display by keeping the MODE button
pressed.
The shift warning light is always active during the running-in
phase (up to 1,000 km / 621 mi). The shift warning light can only
be deactivated, and the values for RPM1 and RPM2 can only be
adjusted after this. The shift warning light flashes red at RPM1
and the shift warning light lights up red at RPM2.
Info
In sixth-gear, the shift warning light is deactivated when
the engine is warm after the first service.
Coolant temperature ≤ 35 °C (≤ 95 °F)
ODO
F01411-10
The shift warning
light always lights
up at
Coolant temperature > 35 °C (> 95 °F)
ODO
RPM1 shift warning
light
RPM2 shift warning
light
1
is located in the center above the dis-
< 1,000 km (< 620 mi)
6,500 rpm
> 1,000 km (> 620 mi)
flashes
lights up
25