Konica Minolta bizhub PRO C5500 Solution Manual page 89

bizhub PRO C5500
Auto low power mode and Auto shut off mode. To disable both auto low power and auto shut off (by technician):
1. Set dipswitch 12-1 to 1.
2. Disable Auto lower power and Auto shut off.
3. Return dipswitch 12-0 to 0 (default).
CAUTION : Be sure to return the dipswitch setting to the default.
SPECIAL NOTE : Solution contribution by KMBT (Japan) and Clinton Marquardt, ESS/BSE
TAUS0802336EN*
Solution ID
Description
What is thePM schedule for the bizhub PRO C6500/C5500?
Solution
ThePM schedule for the bizhub PRO C6500 is every 200K and thePM schedule for the bizhub PRO C5500 is every 150K.
SPECIAL NOTE : Solution contribution by Greg Lantowski, Production Print/SSD
TAUS0802354EN*
Solution ID
Description
Fixing temperature specifications.
Solution
Konica Minoltaconsiders the exact fixing temperature specifications proprietary information and not for public release.
SPECIAL NOTE : Solution contribution by Ed Bellone, Production Print/SSD
TAUS0802566EN*
Solution ID
Description
What is the size counted for Infinite1 to Infinite5 and Longpaper on the Machine Management List?
Solution
The size counted as Infinite1 to Infinite5 and Longpaper can be switched byDIP switch8-7. The function has been includedsince firmware30.0 (version
G00-30).
DIPSW 8-7= 0
Infinite1: 196mm or less
Infinite2: 250mm or less
Infinite3: 330mm or less
Infinite4: 390mm or less
Infinite5: 456mm or less
Longpaper: 457mm or greater
DIPSW 8-7=1
Infinite1: 196mm or less
Infinite2: 490mm or less
Infinite3: 700mm or less
Infinite4: 900mm or less
Infinite5: Over 900mm
Factory default :
DIPSW 8-7= 0
Note : The custom size for DIPSW 8-7=1 setting is Japanese specification only.
SPECIAL NOTE : Solution contribution by KMBT (Japan).
TAUS0802674EN*
Solution ID
Description
How to obtain the main body MAC address.
Solution
The main body MAC can be obtained by PINGing the main body NIC, After thePING completes, type in ARP-A in the command prompt and hit enter, this will
list the TCP/IP addresses on the subnet and their MAC address. Locate the main body NICTCP/IP address in list.
Note :To get the main body NICTCP/IP, go to "Utility" => "Machine admin" => "Network setting" => "Machine NIC".
SPECIAL NOTE : Solution contribution by Chuck Tripp, Production Print/SSD
Copyright , Konica Minolta Business Solutions U.S.A., Inc.
89
Miscellaneous
Solution Usage
Solution Usage
Solution Usage
Solution Usage
March 2010