Konica Minolta bizhub PRO C5500 Solution Manual page 15

bizhub PRO C5500
Solution ID TAUS0800272EN*
Description
Copy quality defects; CQ issues. How to change the Speed Down, 2nd Transfer Pressure or the CPM Down.
Solution
To change the Speed Down, 2nd Transfer Pressure or the CPM Down, perform the following:
1. Touch the Paper Setting on the control panel.
2.Touch the CHANGE setting.
3.Select the Process Adj. button.
4.Press NEXT two times. This shouldgo to the screenfor Speed Down, 2nd Trans Pressure and the CPM Down. Try setting these adjustments for CQ
defects.
CAUTION : Adjustment of the "2nd Trans Offset", "Separation AC" and "Separation DC" may be needed when "Speed Down" is set to "On".
SPECIAL NOTE : Solution contribution by Freddie Burnham, Production Print/SSD
Solution ID TAUS0802406EN*
Description
Error when performing the Scanner Smooth Tone Adjustment.
Solution
CAUSE:This adjustment is not available in the field.
SOLUTION: This adjustment is only used in manufacturing for initial set-up. If any parts in the scanner section are replaced and the copy quality is not
acceptable, performAdj. Data Reset. This will set the default data to a factory average.No further adjustment will be needed.
SPECIAL NOTE : Solution contribution by Clinton Marquardt, ESS
Copyright , Konica Minolta Business Solutions U.S.A., Inc.
15
Other image quality failure
Solution Usage
Solution Usage
March 2010
6