Konica Minolta bizhub PRO C5500 Solution Manual page 82

bizhub PRO C5500
Solution
Please perfrom the step-by-step procedures mentioned in the attached PDF.
Note : To view a PDF, Adobe Reader® must be installed. Adobe Reader® can be downloaded for free from the Adobe® web site at:
http://www.adobe.com/products/acrobat/readstep2.html .
SPECIAL NOTE : Solution contribution by Cesar Jimenez and Mark D'Attilio, Production Print/SSD
Solution ID TAUS0703004EN*
Description
MSDS information for drum, developer and toner.
Solution
Attached are the Material Safety Data Sheets for the bizhub PRO C5500/C5501/C6500/C6500P/C6500P/C6501/C6501P drum, developer and toner.
Notes :
1. To open the ZIP file, WinZip® should be installed. WinZip® can be downloaded from the WinZip® website: http://www.winzip.com/ddchomea.htm . The
file can either be saved to disk or opened. It is recommended to download the ZIP and open from the local computer to view or run.
2. To view a PDF, Adobe Reader® must be installed. Adobe Reader® can be downloaded for free from the Adobe® web site at:
http://www.adobe.com/products/acrobat/readstep2.html .
3. The MSDS documentation is also available via the Konica Minolta Download Selector. Access the Selector from the the KMBS public site (
http://www.kmbs.konicaminolta.us ) Support & Drivers tab or from SSD Web Support (CS Expert Support) by clicking on 'Download MSDS, Drivers,
Firmware and more'.
Solution ID TAUS0703594EN*
Description
How to automatically enable Booklet mode when selecting Fold & Staple.
Solution
Perform the following procedure to automatically enable Booklet mode when selecting Fold & Staple:
1. Select Utility.
2. Select Machine Admin.
3. Select Copy Setting.
4. Select YES for Fold & Stalpe Auto Select.
5. Select OK.
SPECIAL NOTE : Solution contribution by Gregg Gallant, Production Print/SSD
TAUS0703595EN*
Solution ID
Description
How to set the default scan file type.
Solution
The default scan file type can be programmed different for each scan option. Perform the following procedure to set the default scan file type:
1. Select Utility.
2. Select Machine Admin.
3. Select Scan Settings.
4. Select desired scan option (SMB, EMAIL, FTP, HDD).
5. Select desired file type for each(Multi\Single page TIFF, PDF or JPG).
6. Select OK.
SPECIAL NOTE : Solution contribution by Gregg Gallant, Production Print/SSD
Copyright , Konica Minolta Business Solutions U.S.A., Inc.
82
Miscellaneous
Solution Usage
Solution Usage
Solution Usage
March 2010