Konica Minolta bizhub PRO C5500 Solution Manual page 44

bizhub PRO C5500
SPECIAL NOTE : Solution contribution by Ed Bellone and David Aekus, Production Print/SSD
Solution ID TAUS0800745EN*
Description
How to enable SMB (File Sharing) from a Macintosh® OSX 10.2, 10.3 and 10.4.8, or 10.5.
Solution
Please see the attached documentsexplaining how to enable SMB (File Sharing) from a
Macintosh® OSX 10.2, 10.3 and 10.4.8, or 10.5. To view a PDF, Adobe Reader® must be installed. Adobe Reader® can be downloaded for free from the
Adobe® web site at: http://www.adobe.com/products/acrobat/readstep2.html .
SPECIAL NOTE : Solution contribution by Ed Bellone/Cesar Jimenez/Ian Lynch, Production Print/SSD
Solution ID TAUS0801324EN*
Description
Supporting bizhub vCare.
Solution
Initial setup documents for vCare support are attached. The attacheddocuments were sent to all the BSCs. This information is for the BSCs only. It does not
apply to dealers.
Notes :
1. Please be aware that the bizhub C203/C253/C353/C451/C550/C650 support one-way communication.
2. To view a PDF, Adobe Reader® must be installed. Adobe Reader® can be downloaded for free from the Adobe® web site at:
http://www.adobe.com/products/acrobat/readstep2.html .
SPECIAL NOTE : Solution contribution by Greg Lantowski, Production Print/SSD
Solution ID TAUS0900190EN*
Description
Thick Paper BK mode setting.
Solution
Thick Paper BK mode setting is to reduce banding that occurs 230mm in from the lead edge when printing halftone images with thick paper stock.
Thick Paper BK Mode engages the first transfer rollers on each YMC colors and operates in color mode during printing in B/W mode.
Notes :
1. Use only for thick paper on whichbanding occurs.
2. Sinceprinting in B/W mode operates in color mode, the total counter counts in B/W and the maintenance counter counts in color. It does not develop YMC,
but the life of the developer is shortened since it agitates the developing unit.
3.Concerningcolor printing, after printing more than 1000 sheets in this mode toner scattering or blurred color image may occur.
To enable Thick Paper BK mode, perform the following:
1.Press the Utility button on theMFP and select #3 Machine Admin. Setting.
2. Select #6 Common Settings.
3. Pressthe Next button and select Thick Paper BK mode to ON.
Note : If Thick Paper BK modeoption is NOT displayed, enableit by setting software DipSW 11-5 = 1 (ON).
SPECIAL NOTE : Solution contribution by Ed Bellone and Freddie Burnham, Production Print/SSD
Solution ID TAUS0701150EN*
Description
How to set up LDAP on a Fiery® IC-303, Fiery® IC-305or Fiery® IC-408.
Solution
Please see the attachments for complete setup procedures. To view a PDF, Adobe Reader® must be installed. Adobe Reader® can be downloaded for free
from the Adobe® web site at: http://www.adobe.com/products/acrobat/readstep2.html .
Notes :
1.Fiery® IC-303 and Fiery® IC-305 use the same system software.
2. Correctionof procedure within attached documentation:
After setting up the controller with the LDAP information, and when performing the step, "FROM THE C6500" =>step 1, "Click on the Scan Tab", you will
need to first select the EMAIL button in order to see the SEARCH option of step 2.
Copyright , Konica Minolta Business Solutions U.S.A., Inc.
44
Miscellaneous
Solution Usage 6
Solution Usage 6
Solution Usage 6
Solution Usage 5
March 2010