Konica Minolta bizhub PRO C5500 Solution Manual page 169

bizhub PRO C5500
4.Choose N1 (or N2) and press Start key. Confirm the completion of the install and press Continue.
5. Choose other options and press Start key. Confirm the completion of the install and press Continue.
6.Choose Print Control (C) and press Start key. Confirm the completion of the install and press Continue.
7.Choose Image Control (I0) and press Start key. Confirm the completion of the install and press Exit.
SPECIAL NOTE : Solution contribution by Ed Bellone, Production Print/SSD
TAUS0808485EN*
Solution ID
Description
FS-607, intermittent SC47-05.
Solution
CAUSE:Anomaly in previous mainbody firmware version.
SOLUTION:Upgrade mainbody firmware to version 41. The latest version firmware or system software is available via the Konica Minolta Download Selector.
Access the Selector from SSD Web Support (CS Expert Support) by clicking on 'Download MSDS, Drivers, Firmware and more'.
SPECIAL NOTE : Solution contribution by Gregg Gallant, Production Print/SSD
Solution ID TAUS0808490EN*
Description
FS-520/FS-521/FS-607, when printing single sided, stapling is occassionally canceled.
Solution
CAUSE: Anomaly in previous mainbody firmware version.
SOLUTION:Upgrade mainbody firmware to version 41. The latest version firmware or system software is available via the Konica Minolta Download Selector.
Access the Selector from SSD Web Support (CS Expert Support) by clicking on 'Download MSDS, Drivers, Firmware and more'.
Note : Please refer to attached documentation prior to firmware installation. To viewthe PDF, Adobe Reader® must be installed. Adobe Reader® can be
downloaded for free from the Adobe® web site at: http://www.adobe.com/products/acrobat/readstep2.html .
SPECIAL NOTE : Solution contribution by Gregg Gallant, Production Print/SSD
TAUS0808562EN*
Solution ID
Description
FS-607, when exiting custom size paper, Tray Full message is indicated before reaching the upper limit.
Solution
CAUSE:Anomaly in previous version firmware.
SOLUTION:Upgrademainbody firmware to minimum version 41. The latest version firmware or system software is available via the Konica Minolta Download
Selector. Access the Selector from SSD Web Support (CS Expert Support) by clicking on 'Download MSDS, Drivers, Firmware and more'.
Please refer to attached Release Notes prior to firmware installation. To viewthe PDF, Adobe Reader® must be installed. Adobe Reader® can be
downloaded for free from the Adobe® web site at: http://www.adobe.com/products/acrobat/readstep2.html .
SPECIAL NOTE : Solution contribution by Gregg Gallant, Production Print/SSD
Solution ID TAUS0808632EN*
Description
SC22-22.
Solution
CAUSE: The Toner Supply Drive Board has failed.
SOLUTION: Check all ICPs on the Toner Supply Drive Board. Replace board (p/n 65AA -906 1E) as required.
SPECIAL NOTE : Solution contribution by Greg Lantowski, Production Print/SSD
Copyright , Konica Minolta Business Solutions U.S.A., Inc.
Warm-up, wrong display, incorrect operation, lock-up
169
Solution Usage
Solution Usage
Solution Usage
Solution Usage
March 2010