Konica Minolta bizhub PRO C5500 Solution Manual page 40

bizhub PRO C5500
2. Load the 32-bit driver on the server and share it out.
Note : If you receive a pop-up indicating "COPY ERROR", setup cannot copy this file. Example: KOZJA_.PP_. This could possibly be a file path length
limitation. Try reducing this limitation by pulling out the specific driver needed and placing it on the desktop.
3. From the 64-bit client perform the Run command to connect to the 32-bit server (example: \\11.11.5.33) and press enter.
4. Double-click on the shared out printer.
5. Select printer and then properties.
6. Select the Sharing tab and click on the additional drivers box.
7. Select or check-off the 64-bit (x64) driver to be added to the 32-bit server.
8. Select OK and the 64-bit driver should be pushed up to the server.
9. Check the additional drivers of the client and server to confirm that the x86 (32-bit) and x64 are both installed.
Notes :
a.This was tested on like versions of 32-bit and 64-bit drivers.
b.To viewthis procedure, Apple© QuickTime®should be installed.It can be downloaded for free at http://www.apple.com/quicktime/download/ .
SPECIAL NOTE : Solution contribution by Freddie Burnham, Production Print/SSD
TAUS0657076EN*
Solution ID
Description
Parts required to connect a Hecon® conventional key counter, Hecon® Base 10or legacy Minolta key counter to the main body.
Solution
Please see attached Bulletin Number 5563 for details.
Note : To viewthe PDF, Adobe Reader® must be installed. Adobe Reader® can be downloaded for free from the Adobe® web site at:
http://www.adobe.com/products/acrobat/readstep2.html .
SPECIAL NOTE : Solution contribution by Mark D'Attilio, Production Print/SSD
Solution ID TAUS0657703EN*
Description
How to print halftone test patterns to test copy quality issues.
Solution
To print halftone test patterns, perform the following:
1. Enter Service mode.
2. Select Test Mode.
3. Select Test Pattern Output.
4. Set Test Pattern number 53.
5. Select values for the desired colors.
6. Select screen setting.
7. Select Copy screen.
8. Select desired paper size.
9. Press Start.
Note : Please use Test Pattern #53 when troubleshooting problems on the bizhub PRO C6500. Test Pattern #1 is a pure contone image and does not have
any screening applied. Test Pattern #53 uses the selected screen for output. This produces a much smoother output for halftones.
Test pattern #53, mixed halftones at different densities, can also be useful for troubleshooting copy quality (CQ) issues. The following mixed halftones are
required along with samples of the CQ issue when sending in CQ issues to SSD Technical Support or ASG.
Test pattern #53 set to 130 line 1 for Y, M, C, K (prints for each color)
Test Pattern #53 line 1 set to the following - Y = 130 and M = 130 (red)
Test Pattern #53 line 1 set to the following - Y = 130 and C = 130 (green)
Test Pattern #53 line 1 set to the following - C = 130 and M = 130 (blue)
Test pattern #53 set to 40 line 1 for Y, M, C, K (prints for each color)
Test pattern #53 set to 40 line 1 for Y, M, C(process black 1 print)
Test pattern #53 set to 40 line 1 for Y, M, C, K (process black 1 print)
Test Pattern #53 line 1 set to the following - Y = 40 and M = 40 (red)
Test Pattern #53 line 1 set to the following - Y = 40 and C = 40 (green)
Test Pattern #53 line 1 set to the following - C = 40 and M = 40 (blue)
Test pattern #53 set to 60 line 1 for Y, M, C, K (prints for each color)
Test pattern #53 set to 255 line 1 for Y, M, C (prints for each color)
Note :Please provide a copy of theManagement List.
SPECIAL NOTE : Solution contribution by Freddie Burnham, Ed Bellone and Cesar Jimenez, Production Print/SSD
Copyright , Konica Minolta Business Solutions U.S.A., Inc.
40
Miscellaneous
7
Solution Usage
Solution Usage 7
March 2010