Konica Minolta bizhub PRO C5500 Solution Manual page 18

bizhub PRO C5500
SOLUTION: Replace the registration guide plate 2 (p/n A03U7117 00) or the registration roller assembly (p/n 65LAR707 00).
SPECIAL NOTE : Solution contribution by Ed Bellone, Production Print/SSD
Solution ID TAUS0657584EN*
Description
Evenly spaced lines in the sub-scan direction after initial setup.
Solution
CAUSE: Initial settingsdid not take when programmed.
SOLUTION: Time and date, telephone and ADF serial numbers need to be reentered:
1. Sub-power ON => Utility/Counter => Machine Admin settings => System settings => Date and time setting => (Enter year/month/day/time)
=> OK => Exit =>PowerOFF sub-power switch.
2. Enter Service Mode => System settings => Setup date input => (Enter year/month/day) => OK.
CAUTION : DO NOT POWER OFF. Leave machine in Service Mode.
3. In the Service Mode => System settings => Telephone setting => (Enter 16-digit number) => OK.
CAUTION : DO NOT POWER OFF. Leave machine in Service Mode.
4. In the Service Mode => System settings => M/C serial number setting => touch ADF => (Enter ADF serial number) => OK => PowerOFF
sub-switch.
5. PowerON sub-switch and run copies with no security lines.
SPECIAL NOTE : Solution contribution by Ian Lynch/Jim Behrends/Chuck Tripp, Production Print/SSD
Copyright , Konica Minolta Business Solutions U.S.A., Inc.
18
Image blank or solid color
Solution Usage
March 2010
1