Konica Minolta bizhub PRO C5500 Solution Manual page 78

bizhub PRO C5500
6. Touch the desired setting [OFF], [60 seconds], [120 seconds], [190 seconds], [240 seconds], [300 seconds], [360 seconds], [420 seconds], [480 seconds],
or [540 seconds].
7. Touch [OK] on the touchscreen.
8. Touch [Exit] on the touchscreen.
SPECIAL NOTE : Solution contribution by David Aekus, Production Print/SSD
TAUS0700118EN*
Solution ID
Description
How to program the setup date.
Solution
To program the setup date, perform the following:
1. Press the Utility/Counter key.
2. Press Stop-0-0-Stop-0-1.
3. Touch [03 System Setting] on the touchscreen.
4. Touch [04 Setup Date Input] on the touchscreen.
5. Input the month using the numeric keypad located on the operation panel or touchscreen, and then press [Set] on the touchscreen.
6. Input the day using the numeric keypad located on the operation panel or touchscreen, and then press [Set] on the touchscreen.
7. Input the year using the numeric keypad located on the operation panel or touchscreen, and then press [Set] on the touchscreen.
8. Touch [OK] on the touchscreen.
9. Touch [Exit] on the touchscreen.
10. Touch [Exit] on the touchscreen.
SPECIAL NOTE : Solution contribution by David Aekus, Production Print/SSD
TAUS0700330EN*
Solution ID
Description
How to perform the Writing Initial Position Memory adjustment.
Solution
WARNING : DO NOT PERFORM . This adjustment cannot be performed in the Field. Machine setting may be adversely affected if it is performed.
SPECIAL NOTE : Solution contribution by Ed Bellone, Production Print/SSD
TAUS0700333EN*
Solution ID
Description
How to set the bizhub PRO C6500 to automatically select the same size copy paper as the original placed in the ADF.
Solution
To set the C6500 to automatically select the same size copy paper as the original placed in the ADF, perform the following:
1. Select Utility/Counter.
2. Select User Setting.
3. Select Copy Setting.
4. Select ON next to Auto Detect Orig. Size in ADF.
5. Select OK, Close, and Exit to return to the main screen.
SPECIAL NOTE : Solution contribution by David Aekus, Production Print/SSD
Solution ID TAUS0700334EN*
Description
How to select a FULL SCAN AREA when scanning.
Solution
To select a FULL SCAN AREA, perform the following:
1. Select the SCAN tab from the machine operational panel.
2. Select your type of scan along with the recipient destination.
3. Select Scan Settings.
4. Select the Size Setting under the scan size.
5. Select Custom and then Full Area.
SPECIAL NOTE : Solution contribution by David Aekus, Production Print/SSD
Copyright , Konica Minolta Business Solutions U.S.A., Inc.
78
Miscellaneous
Solution Usage
Solution Usage
Solution Usage
Solution Usage
March 2010