Konica Minolta bizhub PRO C5500 Solution Manual page 23

bizhub PRO C5500
Solution
CAUSE: The heat from the fuser can shrink the paper.
SOLUTION: To correct the problem, perform the following:
1. Enter Tech Rep mode.
2. Select Machine Adjustment.
3. Select Printer Adjustment.
4. Select Belt Line Speed Adj. and enter a value between +/-100.
5. Press Set.
6. Press Return to exit the screen.
7. Press Closetwo times.
8. Press Exit two times to exit the Tech Rep mode.
SPECIAL NOTE : Solution contribution by David Aekus, Production Print/SSD
Solution ID TAUS0808009EN*
Description
Carrier attaching to the image. The image has a rough texture.
Solution
CAUSE: Environmental changes can cause carrier attachment to the image.
SOLUTION: Adjust Covered Margin and/or Toner Density Fine adjustment. To adjust the Covered Margin Adjustment and the Toner Density Fine adjustment
perform the following: 1.Enter Service mode.
2.Select Process Adjustment.
3.Select Process Fine Adjustment.
4.Select Covered Margin Fine Adjustment.
5.Decrease the set value.
6.Select Return.
7.Select Toner Density Fine Adjustment.
8.Increase set value.
Note : With both of these adjustments, ensure background does not occur.
SPECIAL NOTE : Solution contribution by Ed Bellone, Production Print/SSD
TAUS0901479EN*
Solution ID
Description
Jitter or blurred line in the main scan direction 4 inchesfrom the trail edge of 12x18 paper stock.
Solution
CAUSE: Failing PS64 (fuser loop sensor),actuator and/or actuator spring.
SOLUTION: Replace the fuser loop sensor (p/n 55VA 8552 1), actuator (p/n 65AA 5337 1) and/or actuator spring (p/n 65AA 5356 0) as necessary.
SPECIAL NOTE : Solution contribution by Ed Bellone, Production Print/SSD
TAUS0700999EN*
Solution ID
Description
How to enable Thin Line enhancement for printing.
Solution
To enable Thin Line enhancement for printing, perform the following:
1. Press the [Utility/Counter] button.
2. Select [User Setting].
3. Select [Printer Setting].
4. Select [Thin Line Enhancement].
5. Select the desired setting [Strong +], [Strong], [Normal], [Weak], [Weak +] and select [OK].
6. Exit the User Setting mode.
SPECIAL NOTE : Solution contribution by David Aekus, Production Print/SSD
Solution ID TAUS0902249EN*
Description
Copyright , Konica Minolta Business Solutions U.S.A., Inc.
Image failure other than density/color - magnification, blur
23
Solution Usage 0
0
Solution Usage
Solution Usage
Solution Usage
March 2010