Konica Minolta bizhub PRO C5500 Solution Manual page 114

bizhub PRO C5500
Note : Even if the sensor connector is disconnected, no paper jam occurs, since the machine is operated with timer.
SPECIAL NOTE : Solution contribution by Ed Bellone, Production Print/SSD
Solution ID TAUS0808636EN*
Description
PF-601/PF-602, J-1606.
Solution
CAUSE: The the conveyance clutches4 and 5, and the pre-registration clutch are not functioning; no power. ICP7 on the PFU driver board is
OPEN.Determine the source of the problem;look for a shorted wire.
SOLUTION: Replace the PFU driver board (p/n A03XH010) if necessary.
SPECIAL NOTE : Solution contribution by Greg Lantowski, Production Print/SSD
TAUS0808637EN*
Solution ID
Description
PF-601/PF-602, J-1603 and J16-04.
Solution
CAUSE: Conveyance cluches 1, 2 and 3 are not working; no power. Check ICP6on the PFU driver board which supplies 24V DC to the clutches.Checkwiring
and the clutches for a short.
SOLUTION: Replace the PFU driver board (p/n A03XH010) if necessary.
SPECIAL NOTE : Solution contribution by Greg Lantowski, Production Print/SSD
Solution ID TAUS0900266EN*
Description
PF-601, unable to replace the front or rear paper guides.
Solution
CAUSE:Modified front or rear paper guide does not fit.Shape is different than the original.
SOLUTION:Parts were changed to improve feeding of thick stock from all trays of the PF-601. The front part/guide (p/n A03X562011) and rear part/guide (p/n
A03X562112) along with the guide plate/upper (p/n A30X560014) to whichthey connecthave to be replaced as a set.The "old" part numbers were
discontinued and are no longer available.Refer to the attached Bulletin Number 6546.
Note : To viewthe PDF, Adobe Reader® must be installed. Adobe Reader® can be downloaded for free from the Adobe® web site at:
http://www.adobe.com/products/acrobat/readstep2.html .
SPECIAL NOTE : Solution contribution by Jim Behrends, Production Print/SSD
TAUS0900280EN*
Solution ID
Description
FS-607, jamming in stacker when stapling or making booklets.
Solution
CAUSE: The Staple Pitch adjustment was not performed.
SOLUTION:Perform the Staple Pitch adjustment. Please refer to the attached procedures. To viewthe PDF, Adobe Reader® must be installed. Adobe
Reader® can be downloaded for free from the Adobe® web site at: http://www.adobe.com/products/acrobat/readstep2.html .
SPECIAL NOTE : Solution contribution by Gregg Gallant, Production Print/SSD
Solution ID TAUS0900292EN*
Description
SC22-21 error.
Copyright , Konica Minolta Business Solutions U.S.A., Inc.
Paper Conveyance jams, no-feed, folding, tearing, skewing, curling
114
Solution Usage
Solution Usage
Solution Usage
Solution Usage
Solution Usage
March 2010