Konica Minolta bizhub PRO C5500 Solution Manual page 71

bizhub PRO C5500
The 3-sheet limit is due to the fact that if more than 3 sheets are foldedthere is a good probability the paper will not stay together and cause a jam in the
finisher.
That is whyup to 20 sheets of paper can bestapled; the staples actingas abind for the pages.
SPECIAL NOTE : Solution contribution by Greg Lantowski, Production Print/SSD
TAUS0901380EN*
Solution ID
Description
How to change theinitial screen to black from color.
Solution
To change the initial screen to black from color:
1. Press the Utility/Counter key.
2. Select Initial settings.
3. Select Copier initial settings.
4. Wait for the copier screen to appear then change the setting to = black.
5. PressOK then exit.
To not have the copier initial screen default back to Color if the "RESET" button is pressed perform the following:
1. Press the Utility/Counter key.
2. Select User Setting on the touchscreen.
3. Select System Setting on the touchscreen.
4. Select Reset Setting on the touchscreen.
5. Select Mode reset setting.
6: Select Reset Button function.
7: Set to "Initialize".
8. Press O.K.
9. Press Exit.
SPECIAL NOTE : Solution contribution by Greg Lantowski, Production Print/SSD
Solution ID TAUS0901527EN*
Description
How to change the Scan to E-Mail/Print via E-Mail ports.
Solution
The default ports are 25 for outgoing and 110 for incoming. To change ports:
1. Browse to the Fiery® TCP/IP address.
2. Select Web Tools.
3. Select Configure tab.
4. Select Launch Configure.
5. A new window will open, input the Administrator password when prompted.
6. From settings list on left side (gray background), select Network.
7. In Network settings options, select Services.
8. In Services settings options, select either E-mail or Print via E-mail.
9. In E-mail settings options on right side of window (white background) select E-mail Setup.
10. A new window will open with E-mail Server settings.
11. Change port numbers as needed.
12. Select Save, window closes.
13. In original Configure window, select Reboot from left side menu (gray background) to apply setting changes.
SPECIAL NOTE : Solution contribution by Chuck Tripp, Production Print/SSD
Solution ID TAUS0902657EN*
Description
Text Thinning/Reversed Text Enhancement Setting.
Solution
Text Thinning/Reversed Text Enhancement Setting works on controller and engine at the same time. Please set carefully; refer tothe attached documents. To
view a PDF, Adobe Reader® must be installed. Adobe Reader® can be downloaded for free from the Adobe® web site at:
http://www.adobe.com/products/acrobat/readstep2.html .
SPECIAL NOTE : Solution contribution by KMBT (Japan)
Copyright , Konica Minolta Business Solutions U.S.A., Inc.
71
Miscellaneous
1
Solution Usage
Solution Usage 1
Solution Usage 1
March 2010