Write Unit - Konica Minolta bizhub PRO C5500 Solution Manual

bizhub PRO C5500

WRITE UNIT

bizhub PRO C6501/C6501P/C5501/C65hc
Part NumberError Code Type
A0U0 R708 00C-4111/C-4112/C-4113 Color
A0U0 R707 00C-4114Black
bizhub PRO C6500/C6500P/C5500
Part NumberError Code Type
A03U R7A6 00 C-4111/C-4112/C-4113 Color
A03U R7A5 00 C-4114 Black
SPECIAL NOTE : Solution contribution by Ed Bellone and Ian Lynch, Production Print/SSD
Solution ID TAUS0901125EN*
Description
C-2840 (C2840)at startup.
Solution
CAUSE: The PGC sensor is malfunctioning.
SOLUTION: Recall Standard Data to Factory Init from the Process Adj screen in Service mode.
SPECIAL NOTE : Solution contribution by David Aekus, Production Print/SSD
Solution ID TAUS0902555EN*
Description
The HTTP Communication protocol is newly supported for bizhub vCare.
Major advantages of HTTP communication include the ease of configuration and the utilization ofthe widely accepted HTTP protocol.
MFPs registered in the vCare system as of 9/15 are to be configured via the new vCare HTTP protocol.
All supported MFPs will be configured for one-way HTTP communication:
•bizhub C220, C280, C360
•bizhub C452, C552, C652, C552DS, C652DS
•bizhub PRO 950
•bizhub PRO 1200, 1200P, 1051
•bizhub PRO C5500, C5501, C6500, C6501
Solution
Setup instructions for vCare HTTP can be downloaded from
Materials. Select Application Solutions
documents presented.
For assistance configuring MFPs for HTTP communication,call the SSD Hotline at 800-825-5664.
The attached "vCare HTTP Guides ver 1.5.zip" contains the vCare HTTP Setup Instructions for the currently supported models.
SPECIAL NOTE: Solution contribution by Mark Kemp, ESS
TAUS0700291EN*
Solution ID
Description
Machine reset returns the machine to full color instead the color choice set as initial color.
Solution
CAUSE:Machine is set to reset to full auto instead of initial settings.
SOLUTION:Set the machine to reset to initial settings instead of full auto.To set the machine to reset to initial settings, perform the following:
1.Press the Utility button.
2. Select User Setting.
3.Select System Setting.
4.Select Reset Setting.
5.Select Mode Reset Setting and change the functionality of the reset button to Initialize and exit screens.
SPECIAL NOTE : Solution contribution by David Aekus and Ed Bellone, Production Print/SSD
Copyright , Konica Minolta Business Solutions U.S.A., Inc.
http://www.mykonicaminolta.com . Navigate to Products
" bizhub vCare " Manuals
Warm-up, wrong display, incorrect operation, lock-up
" Installation Manuals. Choose the vCare HTTP setup instructions from the list of
145
Solution Usage 3
Solution Usage 3
" Product Reference
2
Solution Usage
March 2010