Konica Minolta bizhub PRO C5500 Solution Manual page 60

bizhub PRO C5500
b. The modified DU-102C Drum Kit (Item #A0400Y4) can now be used in place of the DU-102 and DU-102B. DU-102C is packaged the same as DU-102B
but with a green dot label on each box.DU-102C = DU-102B drum + DU-101 cleaning blade/holder.
c. Please see attached documentation for additional detail. To view the PDF, Adobe Reader® must be installed. Adobe Reader® can be downloaded for free
from the Adobe® web site at: http://www.adobe.com/products/acrobat/readstep2.html .
SPECIAL NOTE : Solution contribution by Chuck Tripp and Ed Bellone, Production Print/SSD
TAUS0808056EN*
Solution ID
Description
Can the Pixel Ratio data be used to determine the toner usage or coverage?
Solution
The pixel ratio data cannot be used to determine the toner usage or coverage.
The pixel ratio data reported on the list is simply referential data and it is not designed for accounting purpose.The intentedpurpose of this data is to check
rough machine usage conditions (low coverage or high coverage). Therefore,KMBS does not recommendusing the pixel ratio data for accounting purpose.
The pixel ratio is calculated from the actualarea written bythe write unitand the total paper area, based on A4 size.
The calculation formula is as follows: Pixel ratio =actually written area for the period / total paper area for the period (# of sheets x A4 area).
The total paper area in the above formula, however, is always calculated using A4 sizem regardless of the actualpaper size used. (One sheet of legal, letter,
A3,or A5 paper is counted as 1 sheet of A4.) The calculationis not affected by any machine setting or market destination. The pixel ratio for an A3
whole-area-solid image is calculated as 200%. If a customer prints many A3 whole-area-solids, the pixel ratio exceeds 100%.
In addition,the pixel ratio datadoes not reflect the actual amount of toner attachedper dot.
Solution ID TAUS0808091EN*
Description
Finisher compatibility between bizhub PRO C5500/C6500 and bizhub PRO C5501/C6501.
Solution
The bizhub PRO C6501 peripherals (FD-503, FS-521, LS-505, PB-502, SD-506) are not backwards-compatible to the bizhub PRO C5500/C6500.
The bizhub PRO C5500/C6500 peripherals (FS-503, PB-501) are compatible with the bizhub PRO C6501.
The bizhub PRO C5500/C6500 peripherals (FS-520, FS-607, LU-202, PI-502, PK-512, OT-502) are compatible with the bizhub PRO C5501.
The PF-602 is compatible with the bizhub PRO C6500.
SPECIAL NOTE : Solution contribution by Ed Bellone, Production Print/SSD
Solution ID TAUS0808269EN*
Description
Supported peripherals and configurations.
Solution
PrintStation 6565km supports the following peripherals :
PF-601 -Two-Tray Universal Paper Feed Unit
HT-504 -Heater for PF-601
LU-202 -Large Capacity Tray
HT-503 -Heater for LU-202
FD-501 -Multi-Folding Unit
OT-502 -Output Tray
FS-503 -Staple/Stacker Unit
SD-501 -Saddle-Stitch Unit
LS-501 -Large Capacity Stacker
FS-607 -Booklet Finisher
PK-512(US) -Punch Kit
PK-512(EU) -Punch Kit
PK-513 -Punch Kit
PI-502 -Post Inserter
Copyright , Konica Minolta Business Solutions U.S.A., Inc.
60
Miscellaneous
2
Solution Usage
Solution Usage 2
Solution Usage 2
March 2010