Konica Minolta bizhub PRO C5500 Solution Manual page 36

bizhub PRO C5500
Note : If the files have been converted to a PDF, Acrobat® 6 and7 Pro have built-in Preflighting tools under the "Advanced" menu. Preflighting the
document will provide detail of what color components each graphic is composed. Other add-ons, such as Enfocus© PitStop Professional will also provide the
same capabilities from within Acrobat®.
SPECIAL NOTE : Solution contribution by Ed Bellone and Mark D'Attilio, Production Print/SSD
TAUS0646730EN*
Solution ID
Description
How to change the Administrator password.
Solution
To change the Administrator password, perform the following:
1. Enter the Service mode.
2. Press STOP-0-CLEAR to enter the Enhanced security mode.
3. Select Administrator Password.
4. Enter NEW Administrator password.
5. Click on END.
SPECIAL NOTE : Solution contribution by Ed Bellone and Mark D'Attilio, Production Print/SSD
Solution ID TAUS0657632EN*
Description
Paper specifications and recommendations.
Solution
Please refer to attachedSubstrate Throughput Assurance Guide. To viewthe PDF, Adobe Reader® must be installed. Adobe Reader® can be downloaded for
free from the Adobe® web site at: http://www.adobe.com/products/acrobat/readstep2.html .
SPECIAL NOTE : Solution contribution by Freddie Burnham, Production Print/SSD
Solution ID TAUS0626843EN*
Description
Paper skew specification.
Solution
The specificationfor skew is 0.5% to the length for 1-sided and 1.0% for 2-sided. For example, if the page is 11x17, the maximum skew would be
approximately 2mm. In 2-sided mode, a maximum of 4mm skew may occur on side 2.
SPECIAL NOTE : Solution contribution by David Aekus and Jim Behrends, Production Print/SSD
Solution ID TAUS0651034EN*
Description
Scanning capability.
Solution
How to scan when using the Creo® IC-301 (bizhub PRO C500 only) or IC-304/Plus
TheRemote Scan utility must be loaded on a workstation or thecontroller to utilize scanning on the controller(s). This utility allows for the creation of scan
boxes on theMFP and to retrieve scans from those boxes. Scanning is performed on theprinter/copier using the scan to HDD option from the LCD panel.
Please refer to the attached document for more detail.To viewthe PDF, Adobe Reader® must be installed. Adobe Reader® can be downloaded for free from
the Adobe® web site at: http://www.adobe.com/products/acrobat/readstep2.html .
How to create and perform Scan to E-mail on the Creo® IC-304 version 2
To create and perform scan to E-mail on the Creo® IC-304 version 2, perform the following:
1.From the Creo® workstation select File, Preferences and then Mail Services.
2.Enter the Outgoing Mail Server TCP/IP address (preferred) or the E-mail Server Name.
3.Enter the Attachment Max Size.
4.Enter a valid Administrator E-mail Address. Set it for Anonymous or Basic (authentication User ID and Password).
Note :After performing the above, the bizhub PRO C6500 Scan tab should set up a Box called IC-304 E-mail. Scan something to this box. You will need the
Remote Scan Application loaded on a workstation in order to retrieve the scanned image and to perform the Scan to E-mail.
5. Launch the Remote Scan Application.
6. Type in the Server Name or TCP/IP address and thenpress the Connect button.
7. Select the Scan box IC-304 (or one that you have already created and scanned to). Highlight the scanned file andpress the Send button.
8.Enter the From: and To: E-mail address, Subject and Text if desired and hit the Send button.
Copyright , Konica Minolta Business Solutions U.S.A., Inc.
36
Miscellaneous
19
Solution Usage
Solution Usage 19
Solution Usage 18
Solution Usage 18
March 2010