For thelatest supported configurations/specifications of the bizhub PRO C6500/C5500main frame and peripherals see the following documentation. To view a

PDF, Adobe Reader® must be installed. Adobe Reader® can be downloaded for free from the Adobe® web site at:

http://www.adobe.com/products/acrobat/readstep2.html

Note :Please refer to MyKonicaMinolta.com for the most up-to-date configurations.

SPECIAL NOTE :Solution contribution by Ed Bellone, Production Print/SSD

TAUS0800014EN*

Solution ID

Description

Version 12 firmware.

Solution

Version 12 firmware has been released for the bizhub PRO C5500. Complete details are contained in attached BulletinNumber 6276.

To viewthe PDF, Adobe Reader® must be installed. Adobe Reader® can be downloaded for free from the Adobe® web site at:

http://www.adobe.com/products/acrobat/readstep2.html .

Note : The latest version firmware or system software is available via the Konica Minolta Download Selector. Access the Selector from SSD Web Support

(CS Expert Support) by clicking on 'Download MSDS, Drivers, Firmware and more'.

TAUS0800073EN*

Solution ID

Description

Support for bizhub PRO C5500/IC-408/PB-501 configuration.

Solution

There are no plans for the bizhub PRO C5500 and the IC-408 to support the PB-501.Please refer to the attached Marketing Bulletin for more detail.

To viewthe PDF, Adobe Reader® must be installed. Adobe Reader® can be downloaded for free from the Adobe® web site at:

http://www.adobe.com/products/acrobat/readstep2.html .

SPECIAL NOTE : Solution contribution by Ed Bellone, Production Print/SSD

Solution ID

TAUS0800112EN*

Description

Solution

The bizhub PRO C6500/C5500 does not support this function.

SPECIAL NOTE : Solution contribution by Ian Lynch, Production Print/SSD

Solution ID

TAUS0800192EN*

Description

Lead Edge Erase Adjustment (Printer Adjustment), test pattern No. 16 is not printed and the original on the platen glass is copied.

Solution

CAUSE: The main body operation is normal. The description in the Service Manual is incorrect.

SOLUTION: The description in the Service Manual will be corrected at the next revision. (scheduledfor June 2008). The purpose of this adjustment is to

erase the lead edge when scanning. For the adjustment, usean original to check the erasure amount.

SPECIAL NOTE : Solution contribution by KMBT (Japan).

Solution ID

TAUS0800203EN*

Description

M61, M62 and M63 are listed in the Service Manual,but not in the Parts Catalog.

Solution

These exit cooling fans will be made available in the very near future and the part number will beinParts ordering in the next few days.

Note :Withinthe next month or two, if the fans are needed for an emergency repair,order them as an emergency order, overnight delivery, and the parts will

be pulled from a new machine to fill the order.

Exit cooling fans FM61, FM62 and FM63 have the same part number (p/n A03UM15800).

Please see attachment below for fan location.

Miscellaneous

Solution Usage

March 2010