DF-609, front-to-rear registration is off. Image shift in main scan direction. Printer internal test pattern #16and off platen glass registration is good.

Solution

CAUSE: DF-609 needs centering adjustment.

SOLUTION: Perform the attached ADF Centering adjustment, both Front and Back.

Note : To viewthe PDF, Adobe Reader® must be installed. Adobe Reader® can be downloaded for free from the Adobe® web site at:

http://www.adobe.com/products/acrobat/readstep2.html .

SPECIAL NOTE : Solution contribution by Mike McCarthy, Production Print/SSD

TAUS0900640EN*

Solution ID

Description

DF-609, OPEN ADF FEED COVER AND RELOAD ORIGINALS message when attempting to feed originals.

Solution

PROBABLE CAUSES:

1.The DF feed tires do not drop to initiate feeding due to a failed DFCB.

Replace the DFCB (p/n 20AJ -901 1).

2. Theoriginal paper feed detect actuator is bound in the up position.

Free up the original paper feed detect actuator which is located next to the rear feed roller on the top cover section.

SPECIAL NOTE : Solution contribution by Ed Bellone and Mark D'Attilio, Production Print/SSD

Solution ID

TAUS0802793EN*

Description

DF-319/DF-603/DF-606/DF-609, pages are being scanned multiple times after jamming/misfeeding with accompanying"Reload originals" message. If a

jam/misfeed occurs, the machineindicates to reload originals. After originals have been reloaded and Start is pressed, the machine starts scanning again and

adds the reloaded pages to the document as well as the previously scanned pages.

Solution

CAUSE: Improper reloading of originals. If the machine misfeeds an original it will then indicate to reload originals, but if it jams past the feeder it will indicate

where the jammed sheets are and after jammed sheets are removed it will indicate how many originals need to be reloaded.

SOLUTION:If a misfeed occurs, the message to reload originals means to reseat the originals remaining in the feed tray, NOT add all the originals from

output tray back into feeder.If thedocument feederjams after the feeder it will indicate clear the indicated sheets, thento reload the number of originals that

have not yet been scanned.For example, if 3 sheets are indicated as jammed in thepaper pathand machine indicates to reload 2 originals. the first 2 sheets in

theDF paper pathstarting from just past the feed section should be reloaded and the third sheet (closest to output) should be set in the output tray as it has

already completed the scanning process and is stored in memory.

SPECIAL NOTE : Solution contribution by Chuck Tripp, Production Print/SSD

Solution ID

TAUS0901928EN*

Description

DF-609 tries to eject original when placed on the platen and nothing in the top feeder.

Solution

CAUSE: ADF is selected under Copy Initial Settings.

SOLUTION: Deselect ADF under Utility/User Settings/Initial Settings/Copy Settings. If ADF is checked it will try to default to and feed from the ADF.

SPECIAL NOTE : Solution contribution by Chuck Tripp, Production Print/SSD

Original jam, no-feed, multi-feed, folding, tearing, skewing, curling

100